Ophthalmic Instrument Services

Binocular Indirect Ophthalmoscopes

  • Clean external optics and disinfect smooth surfaces

  • Check the optical path. Instruments severely out of alignment will need to be returned to the manufacturer for evaluation and possible repair.

  • Check illumination output.

  • Pads can be replaced at an extra cost.

$95 plus parts

Exam Chairs and Instrument Stands

Exam Chair:

  • Check for proper operation,

  • Adjust and lubricate swivel, tilt, arm, and headrest locks as necessary. 

  • Check fluid level. 

  • Clean and disinfect surface areas.

$125 plus parts

Instrument Stand:

  • Clean, lubricate, and adjust arms, locks, and bearings as required.

  • Verify correct voltage and operation of charging wells. 

  • Clean and disinfect surface areas.

$125 plus parts

Lensmeter Reconditioning

  • Clean surfaces and knobs

  • Clean open optics,

  • Lubricate and calibrate for accuracy. 

  • Clean and adjust the marking device. 

  • Adjust knobs for smooth operation.

  • Replace marking pins, springs, and the ink pad

  • Service is provided at our facility only

  • Manual lensmeters only.

  • (removing excessive marking ink may involve extra expense.)

$395 plus parts

 Lensmeter Calibration

  • Clean open optics

  • Perform minor calibration for axis and power accuracy. 

  • Adjust the marking device.

  • Service can be provided in your office

  • Manual lensmeters only

$195 plus parts

Slit Lamp Service

  • Clean external optics and disinfect surface areas. 

  • Check optical alignment and adjust as needed. 

  • Check the alignment of apertures and filters.

  • Clean, lubricate, and adjust bearings, gears, and rails. 

  • Verify voltage outputs.

  • Clean, adjust, lubricate, and level the slit lamp table to eliminate that annoying wobble!

$195 plus parts

Goldmann Applanation Tonometer

  • Check the mount and adjust it as needed to orient the prism properly.

  • Inspect and disinfect prism tip and surface areas.

  • Verify the correct pressure readings of 0, 20, and 60 mmHg.

  • Incorrect readings require additional service in our facility

$75 plus parts

Digital Acuity Chart

Check for correct optotype sizing and adjust if needed. Clean the screen and verify that the mounting system is secure. Clean and adjust the refracting mirror system if present

$95

Standard Projector Service

Clean optics and slide.  Clean the reflector and condensing lens, and check the bulb housing. Clean housing and knobs.  Check chart calibration for accuracy and adjust if required.

$95

If there is any service you need that is not listed, please reach out to us!

Please give us a call for more information.

800-749-8427